Koc
Moderator
- Joined
- Jun 28, 2020
- Messages
- 189
- Reaction score
- 5,485
- Points
- 93
Let's take a look over the stuff you will need to get real cash from a dump.
1.First at all you need a valid dump.This is most important and most difficult to find.In the virtual space there are lot of fake sellers which pretend to have dumps,all say "fresh stuff" but you should know that many of them are just rippers which take your money and never return nothing.
2.Once you got your dumps provider and your dumps you need a computer and a msr.What is a msr?It is a machine which read /write your dumps on a card.I made other post for show you how to activate your msr and the main steps to get your dumps written on your card,so read About msr and how to use it .A msr may cost between $300 and $1000 but I can tell you that a cheap one will work just fine.One of my machines is 6 years old and it still works!
3.You also will need cards.Never use your original cards for do this job!Never!!!!When you doing no2 business you must put your safety first.That's why you should hide your identity and not connect never this work with your real name.You can get blank card or pre-printed card from internet.But there is the possibility to use old cards too.This is not a professional way because the number printed on the card and the number from the sweep ticket won't match and if the decline card message,call costumer service or pickup card can then maybe the shopkeeper will check this detail.
4.An embosser machine (optional!) if necessary if you like o work as a proffesional carder.The embosser will make you able to write the card number from the dump on your card so that the sweep and the card number match.This is very important if you will go to shopping with a platinium card and try to buy expansive stuff.A manual embossing machine cost between $250 and $700.An automatic embosser is much more expansive but it save alot of time and gives a better quality.Personal i used the manual machine long time and i can't say that it was not good.It is not illegal to buy embosser machine because it is used in many small ar big companies for make costumer cards,free gift cards and so on.
5.A professional carder and not only him ,but everyone how want to work out a dump will need a fake id or passport.It is more easy to get a fake id but I advice you that you got an id made by a specialist and don't try to make yourself if you don't have enough knowledge and a really good kit.I will try to give you some link where you can contact a good id provider.
Now that you got the fake id, dumps and the necessary machines you can start write the dumps on the cards and try to get money! Be safe!
1.First at all you need a valid dump.This is most important and most difficult to find.In the virtual space there are lot of fake sellers which pretend to have dumps,all say "fresh stuff" but you should know that many of them are just rippers which take your money and never return nothing.
2.Once you got your dumps provider and your dumps you need a computer and a msr.What is a msr?It is a machine which read /write your dumps on a card.I made other post for show you how to activate your msr and the main steps to get your dumps written on your card,so read About msr and how to use it .A msr may cost between $300 and $1000 but I can tell you that a cheap one will work just fine.One of my machines is 6 years old and it still works!
3.You also will need cards.Never use your original cards for do this job!Never!!!!When you doing no2 business you must put your safety first.That's why you should hide your identity and not connect never this work with your real name.You can get blank card or pre-printed card from internet.But there is the possibility to use old cards too.This is not a professional way because the number printed on the card and the number from the sweep ticket won't match and if the decline card message,call costumer service or pickup card can then maybe the shopkeeper will check this detail.
4.An embosser machine (optional!) if necessary if you like o work as a proffesional carder.The embosser will make you able to write the card number from the dump on your card so that the sweep and the card number match.This is very important if you will go to shopping with a platinium card and try to buy expansive stuff.A manual embossing machine cost between $250 and $700.An automatic embosser is much more expansive but it save alot of time and gives a better quality.Personal i used the manual machine long time and i can't say that it was not good.It is not illegal to buy embosser machine because it is used in many small ar big companies for make costumer cards,free gift cards and so on.
5.A professional carder and not only him ,but everyone how want to work out a dump will need a fake id or passport.It is more easy to get a fake id but I advice you that you got an id made by a specialist and don't try to make yourself if you don't have enough knowledge and a really good kit.I will try to give you some link where you can contact a good id provider.
Now that you got the fake id, dumps and the necessary machines you can start write the dumps on the cards and try to get money! Be safe!